< Back to Results

Reconditioning the "Smart" Lithium-Ion Battery

Applies To: VERDICT®, VERUS®, VERUS® PRO, VERUS® Wireless

How to “recondition” the Lithium-Ion battery-pack.


The following process can be used to “recondition” any intelligent Lithium-Ion battery-pack including those used in the VERUS, VERDICT, VERUS Wireless and VERUS PRO. Depending how many “valid” recharge cycles the battery has gone through, it should be somewhere between 80% and 100% of its original capacity once reconditioned.

Step One: Verify that the battery is completely charged

  • Plug the AC charging cable into the unit, thereby beginning the charging cycle to the battery
  • Leave the system charging overnight, or for at least 8 hours

Step Two: Verify that the battery is completely discharged

  • If not already, install the battery in the platform and power it on
  • Disconnect all other power sources including the AC charging cable
  • Leave the product powered on overnight, or until the software powers off the unit
  • DO NOT turn the platform off, even if the system warns that the battery-charge is “low”

Step Three: Recharge/Recondition the battery pack

  • Once the software powers off the unit, which indicates the battery has been completely discharged, plug the AC charging cable into it, thereby beginning the battery charging cycle
  • Leave the system charging overnight, or for at least 8 hours

Once the battery has been fully charged it has been reconditioned.

Replacement Battery Part Numbers:

VERUS Wireless – EAA0354L12A

Last Updated: April 16, 2015

Got Questions?

Contact Diagnostic Customer Care:
Car & Light Truck Diagnostics

Send e-mail
(800) 424-7226

Heavy-Duty Truck Diagnostics

Send e-mail
Contact us here
(800) 311-5452

Request Product Information

Snap-on Diagnostic Tools and

Repair Information

Snap-on is a trademark of Snap-on Incorporated.

All other marks are marks of their respective holders.

©2018 Snap-on Incorporated. All Rights Reserved.

Got Questions?

Request Product Information

Online Product Help Here

Contact Diagnostic Customer Care

Send e-mail

(800) 424-7226

Mon - Fri 6am - 5pm PST


Product Registration:

• US     • Canada

We welcome your feedback on our website.


Enter your name:



Please rate your experience in the following:
(1 being an unpleasant experience and 10 being exceptional)


 1  2  3  4  5  6  7  8  9  10


 1  2  3  4  5  6  7  8  9  10


Suggested improvements:

Can we contact you by e-mail to discuss your feedack further?